Before Your Plumber’s Visit
What to clear, find and set aside before a plumber comes to a house, a rental or a shop, and how the scope of the work gets set.
A plumber’s time on a visit is best spent on the problem itself, not on emptying a cabinet or moving boxes away from the water heater. A little preparation the day before also makes it easier to shut the water off when the repair calls for it, and it keeps pets, tenants and parked cars out of the way of the work.
Build a Preparation List for the Visit
Choose the kind of job and tick what applies to the property. The list covers what to clear, find and set out before the plumber comes.
Visit Preparation Checklist
The list changes with the job and with each box you tick.
Choose the job and tick what applies, then press the button.
What Happens in the House During a Repair Visit
Every job is different, but seen from inside the house, most repair visits run in roughly this order:
- The plumber looks at the problem and the space around it, and may ask a few questions about what you have seen.
- The fixture, the line and the pipes around it get checked. For a drain or a sewer line, a cable or a camera may go in through the cleanout.
- Before any work starts, you hear what was found, what the repair involves and what it costs, and you decide whether to go ahead.
- The water goes off, to one fixture or to the whole house, for part of the visit.
- The repair or the installation, which can be noisy while a pipe is cut or a drain machine runs.
- The water comes back on and the work is tested: faucets run, toilets flush, and joints are checked for drips.
- If the job needed a permit, an inspector may come on another day, and someone has to let the inspector in.
- Before the plumber leaves, it is a good time to ask what to watch for over the next few days.
A small job can fold several of these into a few minutes under a sink, while a sewer repair can stretch them over more than one day.
Clearing the Way to the Pipes, Valves and Cleanout
On most visits the plumber needs to reach three things: the problem, the valve that shuts off its water, and a clear path between them and the door.
- Under the sink: empty the cabinet completely for a faucet, a disposal or a drain repair. The work happens lying on the cabinet floor, and the shutoff valves sit at the back.
- The water heater and the main shutoff: clear a path to both, even when the job is somewhere else, since the water may need to be off for the repair.
- The sewer cleanout: if you know where it is, clear around it. It is a capped pipe that opens into the sewer line, often just outside the foundation or in the front lawn; in many older Lansing houses there is one inside too, in the basement floor or at the base of the main drain stack.
- The driveway: for a sewer line repair or a backup, move cars out of the way, since the work can need room near the house for equipment, and a repair can mean digging in the yard.
- Pets and children: keep them in another room while the water is off and the tools are out.
If You Bought the Fixture Yourself
Keep the new fixture in its box with the instructions and every small part, in the room where it goes. Before the visit, compare it with the one it replaces: the number of holes a faucet needs, the size of a vanity top, or a toilet’s rough-in, the distance from the finished wall to the center of its drain.
A shower head or a faucet usually swaps without surprises. A toilet or a vanity that does not match the old one can mean moving a drain or a supply line, which is better known before the water is off.
How the Scope and the Estimate Get Set
Can I get a price over the phone?
Usually not a firm one. A backed-up floor drain could be a clog a few feet in or roots deep in the sewer line, and those are very different jobs. The scope of the work, and the price with it, is set once the plumber has seen the problem.
What does the plumber need to see to set the scope?
The fixture or line with the problem, the valves that control its water, and for a drain, the cleanout or another way into the line. For a water heater replacement, the space around the heater and its gas line, vent or wiring decide much of the work.
Why does the scope sometimes change once the work starts?
Pipes hide a lot. An old galvanized fitting can break when it is loosened, a camera can show a second problem farther down the line, or the wall behind a leak can be wetter than it looked. When that happens, a plumber usually stops and explains the change before going further.
Does a camera inspection change the estimate for a sewer line?
It often settles it. The camera shows whether roots, a sag, a crack or a break is the trouble and where along the line it sits, which decides between clearing the line and repairing a section of it.
Put the Visit on the Schedule
Choose the job on the booking form, and mention pets, a tenant or a cleanout you already know about.